• home icon
  • arrow icon Products
  • arrow iconTable Top Transmitters - UHF (12-86-6000)

Table Top Transmitters - UHF

12-86-6000

Ideally suited to a variety of Hospitality, retail assistance and control applications, the 12-86-6000  is a small, high specification, POCSAG Table-top, desktop of wall-mounted transmitter utilising the 12-86-5000 paging transmitter printed circuit board. It subsequently inherits all the type approvals of the 12-86 family. It is capable of transmitting text messages directly to pocket pagers, audible or visual alarms or to LCD screens.

The 12-86 range of products can send text messages directly to pocket pagers, LCD's or receivers, providing simpler, lower cost systems .

Using an appropriate receiver, the 12-86-6000, can also be used for a general remote control applications such as turning on lights, disabling alarms etc.

Powered by a standard CR2032 coin cell, the transmitter will operate for more than one thousand transmissions under normal conditions before the battery needs to be replaced.

The units can be programmed with a serial programming cable (purchased separately) or they can be supplied pre-programmed.

Although the 12-86 is a low power transmitter, when used as a call-point paging transmitter a direct line of sight range of up to eight hundred metres can be expected. When used within buildings the range may vary depending upon the environment.

The 12-86-6000 is supplied in a nicely presented angled housing, suitable for tablet-top, desk-top, door or wall mounting.

For configuration software please see the Downloads section.

  • UHF operation
  • Small, light & neat
  • Internal cell battery
  • Cost-effective
  • Ideal for near distance paging, hospitality, assistance, duress or operation of lights or doors etc.
  • Capable of operating on existing in-house paging systems
  • 1 or 2 button variants available, each button individually configurable with its own 35-character message
  • Simple Telemetry solution or for use with pocket pagers
  • Commercial paging solution
Specification
Frequency Range 440-470MHz - UHF
Frequency Selection User configurable
Power Supply 3V CR2032 button cell
Battery Life Approx 1000 transmissions
Approx 10 years standby
Power Consumption Standby: 100nA
Transmit: 45mA
Transmit Power 10mW
Channel Spacing 25kHz
Modulation FSK with NRZ data
Deviation ±4.5kHz
Transmit Duty Cycle Up to 20%; Maximum 30 seconds on time
Baud Rate 512
Message Format POCSAG
Configuration Application 12-86 Configuration Tool
(Avialable for free download from Downloads page)
Programming Cable 12-47-0000 (Board header to DB9)
Can be used with a USB to RS232 DB9 Serial Adapter Cable
12-48-0000 (Board header to mini USB)
Serial Port 9600 , N, 8, 1; RS232
Discrete Inputs 1 or 2 button options
RF Connector Internal aerial
Environmental Protection Not suitable for outdoor use and should be protected from adverse environmental conditions
Operating Temperature -10ºC to +55ºC (+14ºF to +131ºF)
Weight 90g
Enclosure Dimensions 52mm x 99mm x 30mm (WxDxH)
Enclosure Material Plastic
Colour Black
Type Approvals AS/NZS 4769.1:2000 + Amendment 1:2002 (RF)
EN 300-224-2 (RF)
FCC CFR47 Part 90 (RF)
EN 301 489-2 V2.1.0 (EMC)
EN 60950-1:2006 (Safety)
12-86-6000 Brochure
12-86-0000 Configuration Tool
  • Information

    The 12-86 range of products can send text messages directly to pocket pagers, LCD's or receivers, providing simpler, lower cost systems .

    Using an appropriate receiver, the 12-86-6000, can also be used for a general remote control applications such as turning on lights, disabling alarms etc.

    Powered by a standard CR2032 coin cell, the transmitter will operate for more than one thousand transmissions under normal conditions before the battery needs to be replaced.

    The units can be programmed with a serial programming cable (purchased separately) or they can be supplied pre-programmed.

    Although the 12-86 is a low power transmitter, when used as a call-point paging transmitter a direct line of sight range of up to eight hundred metres can be expected. When used within buildings the range may vary depending upon the environment.

    The 12-86-6000 is supplied in a nicely presented angled housing, suitable for tablet-top, desk-top, door or wall mounting.

    For configuration software please see the Downloads section.

  • Details
    • UHF operation
    • Small, light & neat
    • Internal cell battery
    • Cost-effective
    • Ideal for near distance paging, hospitality, assistance, duress or operation of lights or doors etc.
    • Capable of operating on existing in-house paging systems
    • 1 or 2 button variants available, each button individually configurable with its own 35-character message
    • Simple Telemetry solution or for use with pocket pagers
    • Commercial paging solution
  • Specifications
    Specification
    Frequency Range 440-470MHz - UHF
    Frequency Selection User configurable
    Power Supply 3V CR2032 button cell
    Battery Life Approx 1000 transmissions
    Approx 10 years standby
    Power Consumption Standby: 100nA
    Transmit: 45mA
    Transmit Power 10mW
    Channel Spacing 25kHz
    Modulation FSK with NRZ data
    Deviation ±4.5kHz
    Transmit Duty Cycle Up to 20%; Maximum 30 seconds on time
    Baud Rate 512
    Message Format POCSAG
    Configuration Application 12-86 Configuration Tool
    (Avialable for free download from Downloads page)
    Programming Cable 12-47-0000 (Board header to DB9)
    Can be used with a USB to RS232 DB9 Serial Adapter Cable
    12-48-0000 (Board header to mini USB)
    Serial Port 9600 , N, 8, 1; RS232
    Discrete Inputs 1 or 2 button options
    RF Connector Internal aerial
    Environmental Protection Not suitable for outdoor use and should be protected from adverse environmental conditions
    Operating Temperature -10ºC to +55ºC (+14ºF to +131ºF)
    Weight 90g
    Enclosure Dimensions 52mm x 99mm x 30mm (WxDxH)
    Enclosure Material Plastic
    Colour Black
    Type Approvals AS/NZS 4769.1:2000 + Amendment 1:2002 (RF)
    EN 300-224-2 (RF)
    FCC CFR47 Part 90 (RF)
    EN 301 489-2 V2.1.0 (EMC)
    EN 60950-1:2006 (Safety)
  • Manuals & Downloads
    12-86-6000 Brochure
    12-86-0000 Configuration Tool

Does your project needs a reliable wireless component?

Not sure how your project can benefit from our systems? Get in touch to
discuss your requirements with our wireless engineers.